Development of an Optimal Additive Package for Re-refined Lubricating Oils.
The re-refining of used SAE 20W- 50 lubricating oils from automotive (car) gasoline engines and the development of an additive package for the re-refined oil has been investigated. Vacuum distillation preceded...
Đã lưu trong:
| Tác giả chính: | |
|---|---|
| Tác giả khác: | |
| Định dạng: | Luận văn |
| Ngôn ngữ: | Tiếng Anh |
| Được phát hành: |
Obafemi Awolowo University
2014
|
| Những chủ đề: | |
| Truy cập trực tuyến: | http://localhost:8080/xmlui/handle/123456789/2114 |
| Các nhãn: |
Thêm thẻ
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
| Tóm tắt: | The re-refining of used SAE 20W- 50 lubricating oils from automotive (car) gasoline engines and the development of an additive package for the re-refined oil has been investigated.
Vacuum distillation preceded by caustic treatment of the used oil produced about 65% (w/w) of SAE 30 grade base tube stock.
Response Surface Methodology (RSM) was successfully utilized in the optimization of an additive package consisting of an oxidation/corrosion inhibitor, detergent and dispersant additives as independent variables. Neutralization number, corrosion and sludge deposition were the responses measured.
An optimal additive package of 0.988% (v/v) oxidation/ corrosion inhibitor 1.325% (v/v) detergent additive and 3.0% (v/v) dispersant additive was found for the SAE 40 grade lubricating oil obtained from a blend of the re-refined oil and bright stock in the ratio 3:1. |
|---|