Recovery of Heavy Oil from Nigerian Tar Sands.

Solvent extraction of heavy oil from Nigerian tar sands has been investigated using toluene. Pulverization, followed by sieving of the tar sand resulted in spherical agglomeration of the tar sand particles. The agglomeration was found to beneficiate the tar sands in terms of increased percent oil co...

詳細記述

保存先:
書誌詳細
第一著者: Dawodu, Olukayode Fatai
その他の著者: Oshinowo
フォーマット: 学位論文
言語:英語
出版事項: Obafemi Awolowo University 2014
主題:
オンライン・アクセス:http://localhost:8080/xmlui/handle/123456789/2115
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
_version_ 1810764577012449280
author Dawodu, Olukayode Fatai
author2 Oshinowo
author_facet Oshinowo
Dawodu, Olukayode Fatai
author_sort Dawodu, Olukayode Fatai
collection DSpace
description Solvent extraction of heavy oil from Nigerian tar sands has been investigated using toluene. Pulverization, followed by sieving of the tar sand resulted in spherical agglomeration of the tar sand particles. The agglomeration was found to beneficiate the tar sands in terms of increased percent oil content to the tune of and 13% for the rich and lean tar sands respectively. The effects of solid/liquid ratio, temperature and agitation on the extraction process were evaluated factorial experimental design. Extraction efficiency was found to increase with increasing agitation speed and cuss transfer driving force, expressed in terms of solid/ liquid ratio, but decreased with increasing temperature. Of the three variables, the solid/liquid ratio the greatest effect on extraction efficiency. The rate of oil extraction, expressed as extractibility showed a great dependence on agitation. Twelve and thirteen fold increases creases in extractibility were obtained at solid/liquid ratios of 1/20 and 1/5 respectively for 2.8 fold increase in agitation (250 r.p.m to 700 r.p.m). The asphaltenes content of the heavy oil extracted at 50C was about 12% lower than that of the heavy oil extracted at 25°C for extraction times below 10 minutes. The implication of this reduction in asphaltenes level could be very significant in terms of the cost of upgrading the heavy oil. Stage-wise extraction gave high extraction efficiency at a low solid/liquid ratio. An efficiency of about 99 was obtained at a total, solid/liquid ratio of 2/3 w/v (43wt% solid loading) and agitation speed of 430 r.p.m in a three stage extraction. From an analysis of the power consumed and time ±or extraction, it was found that 440 r.p.m, 26 minutes and 440 r.p.m, 18 minutes could be the most economical agitation and time levels of operation at solid/liquid ratio- of 1/5 and 1/20 respectively.
format Thesis
id oai:ir.oauife.edu.ng:123456789-2115
institution My University
language English
publishDate 2014
publisher Obafemi Awolowo University
record_format dspace
spelling oai:ir.oauife.edu.ng:123456789-21152023-05-13T11:12:17Z Recovery of Heavy Oil from Nigerian Tar Sands. Dawodu, Olukayode Fatai Oshinowo Ademodi Tar sand heavy oil toluene pulverization agglomeration extraction agitation asphaltenes level Solvent extraction of heavy oil from Nigerian tar sands has been investigated using toluene. Pulverization, followed by sieving of the tar sand resulted in spherical agglomeration of the tar sand particles. The agglomeration was found to beneficiate the tar sands in terms of increased percent oil content to the tune of and 13% for the rich and lean tar sands respectively. The effects of solid/liquid ratio, temperature and agitation on the extraction process were evaluated factorial experimental design. Extraction efficiency was found to increase with increasing agitation speed and cuss transfer driving force, expressed in terms of solid/ liquid ratio, but decreased with increasing temperature. Of the three variables, the solid/liquid ratio the greatest effect on extraction efficiency. The rate of oil extraction, expressed as extractibility showed a great dependence on agitation. Twelve and thirteen fold increases creases in extractibility were obtained at solid/liquid ratios of 1/20 and 1/5 respectively for 2.8 fold increase in agitation (250 r.p.m to 700 r.p.m). The asphaltenes content of the heavy oil extracted at 50C was about 12% lower than that of the heavy oil extracted at 25°C for extraction times below 10 minutes. The implication of this reduction in asphaltenes level could be very significant in terms of the cost of upgrading the heavy oil. Stage-wise extraction gave high extraction efficiency at a low solid/liquid ratio. An efficiency of about 99 was obtained at a total, solid/liquid ratio of 2/3 w/v (43wt% solid loading) and agitation speed of 430 r.p.m in a three stage extraction. From an analysis of the power consumed and time ±or extraction, it was found that 440 r.p.m, 26 minutes and 440 r.p.m, 18 minutes could be the most economical agitation and time levels of operation at solid/liquid ratio- of 1/5 and 1/20 respectively. 2014-06-25T13:56:26Z 2018-10-27T12:24:33Z 2014-06-25T13:56:26Z 2018-10-27T12:24:33Z 1985 Thesis APA http://localhost:8080/xmlui/handle/123456789/2115 en pdf application/pdf Obafemi Awolowo University
spellingShingle Tar sand
heavy oil
toluene
pulverization
agglomeration
extraction
agitation
asphaltenes level
Dawodu, Olukayode Fatai
Recovery of Heavy Oil from Nigerian Tar Sands.
title Recovery of Heavy Oil from Nigerian Tar Sands.
title_full Recovery of Heavy Oil from Nigerian Tar Sands.
title_fullStr Recovery of Heavy Oil from Nigerian Tar Sands.
title_full_unstemmed Recovery of Heavy Oil from Nigerian Tar Sands.
title_short Recovery of Heavy Oil from Nigerian Tar Sands.
title_sort recovery of heavy oil from nigerian tar sands
topic Tar sand
heavy oil
toluene
pulverization
agglomeration
extraction
agitation
asphaltenes level
url http://localhost:8080/xmlui/handle/123456789/2115
work_keys_str_mv AT dawoduolukayodefatai recoveryofheavyoilfromnigeriantarsands