The Development, Construction and Evaluation of a Micro-spray Dryer
A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the part...
Uloženo v:
| Hlavní autor: | |
|---|---|
| Další autoři: | |
| Médium: | Diplomová práce |
| Jazyk: | angličtina |
| Vydáno: |
Obafemi Awolowo University
2014
|
| Témata: | |
| On-line přístup: | http://localhost:8080/xmlui/handle/123456789/2166 |
| Tagy: |
Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
|
| Shrnutí: | A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the particle size distribution.
The dryer efficiency at optimum conditions, varied between 44.7%-59.7% and the average particle size was 10ym - 20um. The highest temperature of the air possible for drying was 413K while the lowest was 355K and the maximum air flow rate in the chamber was 31 litres/minute. The drying rate was 0.65g/min and, the maximum relative humidity of the outgoing air at the minimum temperature was 96%. |
|---|