The Development, Construction and Evaluation of a Micro-spray Dryer
A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the part...
সংরক্ষণ করুন:
| প্রধান লেখক: | |
|---|---|
| অন্যান্য লেখক: | |
| বিন্যাস: | গবেষণাপত্র |
| ভাষা: | ইংরেজি |
| প্রকাশিত: |
Obafemi Awolowo University
2014
|
| বিষয়গুলি: | |
| অনলাইন ব্যবহার করুন: | http://localhost:8080/xmlui/handle/123456789/2166 |
| ট্যাগগুলো: |
ট্যাগ যুক্ত করুন
কোনো ট্যাগ নেই, প্রথমজন হিসাবে ট্যাগ করুন!
|
| সংক্ষিপ্ত: | A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the particle size distribution.
The dryer efficiency at optimum conditions, varied between 44.7%-59.7% and the average particle size was 10ym - 20um. The highest temperature of the air possible for drying was 413K while the lowest was 355K and the maximum air flow rate in the chamber was 31 litres/minute. The drying rate was 0.65g/min and, the maximum relative humidity of the outgoing air at the minimum temperature was 96%. |
|---|