The Development, Construction and Evaluation of a Micro-spray Dryer
A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the part...
Сохранить в:
| Главный автор: | |
|---|---|
| Другие авторы: | |
| Формат: | Диссертация |
| Язык: | английский |
| Опубликовано: |
Obafemi Awolowo University
2014
|
| Предметы: | |
| Online-ссылка: | http://localhost:8080/xmlui/handle/123456789/2166 |
| Метки: |
Добавить метку
Нет меток, Требуется 1-ая метка записи!
|
| Итог: | A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the particle size distribution.
The dryer efficiency at optimum conditions, varied between 44.7%-59.7% and the average particle size was 10ym - 20um. The highest temperature of the air possible for drying was 413K while the lowest was 355K and the maximum air flow rate in the chamber was 31 litres/minute. The drying rate was 0.65g/min and, the maximum relative humidity of the outgoing air at the minimum temperature was 96%. |
|---|