The Development, Construction and Evaluation of a Micro-spray Dryer
A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the part...
Sparad:
| Huvudupphovsman: | |
|---|---|
| Övriga upphovsmän: | |
| Materialtyp: | Lärdomsprov |
| Språk: | engelska |
| Publicerad: |
Obafemi Awolowo University
2014
|
| Ämnen: | |
| Länkar: | http://localhost:8080/xmlui/handle/123456789/2166 |
| Taggar: |
Lägg till en tagg
Inga taggar, Lägg till första taggen!
|
| Sammanfattning: | A co-current laboratory spray dryer was designed to meet multipurpose requirements for drying food materials and constructed from relatively cheap locally available materials. Tests, on the basis of 100% moisture were carried out to characterise the equipment and milk was dried to determine the particle size distribution.
The dryer efficiency at optimum conditions, varied between 44.7%-59.7% and the average particle size was 10ym - 20um. The highest temperature of the air possible for drying was 413K while the lowest was 355K and the maximum air flow rate in the chamber was 31 litres/minute. The drying rate was 0.65g/min and, the maximum relative humidity of the outgoing air at the minimum temperature was 96%. |
|---|