The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines

The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines

DOI: 10.1109/IAS.2003.1257783

Enregistré dans:

Détails bibliographiques
Auteurs principaux:	Ojo, O, Osaloni, F., Zhiqiao, Wu, Omoigui, Michael
Format:	Revue
Langue:	anglais
Publié:	IEEE 2020
Sujets:	flux linkage and magnetic saturation The steady-state modeling and analysis of the machine
Accès en ligne:	https://ir.oauife.edu.ng/handle/123456789/5081
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

A control strategy for optimum efficiency operation of high performance interior permanent magnet motor drives
par: Ojo, O., et autres
Publié: (2020)

Man Minus Machines Equals a Labourer
par: Adekoya, Lawson Olabosipo
Publié: (2018)

Is There a Limit to Nanoscale Mechanical Machining
par: Oluwajobi, A.O., et autres
Publié: (2020)

report of a magnetic survey of South Africa
par: Beattie, J.C
Publié: (2014)

Continuous quantum phase transitions in the one-dimensional spin-1/2 axial next-nearest-neighbour Ising model in two orthogonal magnetic ¯elds
par: ADEGOKE, KUNLE, et autres
Publié: (2020)

Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
par: Ojo, Olorunfemi, et autres
Publié: (2023)

Modeling Socioeconomic Factors Affecting Age at Marriage among females in Kogi State, Nigeria
par: Adarabioyo, M. I., et autres
Publié: (2014)

Energy Flux and Animal Products
par: Emmanuel, B. S.
Publié: (2013)

Geophysical investigation of remotely sensed suspected fault Zones around iwaraja-ijebu ijesa area of osun state, nigeria.
par: OKUNUBI, OLAJIDE MICHAEL
Publié: (2023)

Modeling and Implementing Record Linkage in Health Information Systems
par: Philip, Achimugu, et autres
Publié: (2020)

Some Illusions of Urban/Industrial Paradigm of Development
par: Ighalo, J. I.
Publié: (2013)

Interiors
par: CAMPBELL, Nina
Publié: (2013)

Statistical Analysis of Some Socioeconomic Factors Affecting Age at Marriage among Males in Kogi State, Nigeria
par: Awe, Olushina O., et autres
Publié: (2014)

Design of an on-line Library Cataloguing System.
par: Faleye, Emmanuel Omoniyi
Publié: (2023)

Socio-economic Linkages of the Ife-Ijesa Frontier Population in Southwestern Nigeria
par: Aloba, Oluwole
Publié: (2014)

Agronomy of permanent crops
par: Department of Crop Croduction and Protection
Publié: (2024)

ZERO-TILLAGE AND INTERCROPPING ON A TROPICAL ALFISOL: EFFECTS ON SOIL PHYSICAL PROPERTIES
par: AJAYI, A. S., et autres
Publié: (2020)

Root growth and nutrient flux of cowpea under field conditions
par: ADEPETU, J. A.
Publié: (2020)

Studies on the Natural Antifungal compounds from Yam tubers (Dioscorea Alata. L.)
par: Aderiye, Babatunde Idowu
Publié: (2023)

Broadband Solar Irradiance and Photometric Illuminance at the Tropical Station in Ileife Nigeria
par: Okogbue, Emmanuel Chilekwu
Publié: (2015)

Design of An on-line Library Cataloguing System.
par: Faleye, Emmanuel Omoniyi
Publié: (2023)

A PRELIMINARY SURVEY OF THE FERTILITY STATUS OF SOILS IN ONDO STATE UNDER TRADITIONAL CULTIVATION
par: ADEPETU, J. A., et autres
Publié: (2020)

Animal flux and animal products
par: Sonaiya, Emmanuel Babafunso
Publié: (2019)

Some illusions of urban/industrial paradigm of development
par: Ighalo, J.I.
Publié: (2019)

SOLUTIONS for interior design
Publié: (2009)

Machining processes and machines : fundamentals, analysis, and calculations
par: HUDA, Zainul
Publié: (2021)

Studies on the Natural Antifungal Compounds from Yam tubers (Dioscorea Alata. L.).
par: Aderiye, Babatunde Idowu
Publié: (2014)

Sustainable design for interior environments
par: WINCHIP, Susan M.
Publié: (2007)

Post-infectional Production of Phytoalexin in White Yam (Discorea Rotundata Linn.) Innoculated with Botryodiplodia Theobromae Pat
par: Fagbohun, Dayo Emman
Publié: (2014)

“From science to technology & innovation management"
par: Ilori, M.O
Publié: (2019)

Development of Secured Appliance Automation System for Homes Industries
par: Olukunle, Julius
Publié: (2023)

Modern machining process
Publié: (2020)

Machining and CNC technology
par: FITZPATRICK, Michael Smith, Keith
Publié: (2019)

A Thermal Explosion Theory for Parallel Reactions.
par: Okoya, Samuel Segun
Publié: (2014)

Laboratory manual of fluid mechanics and machines
par: GUPTA, V.P. Chandra, J. Gupta, K.S
Publié: (1990)

Dynamic and steady-state operation of a five phase induction machine with an open stator phase
par: Karugaba, Sosthenes, et autres
Publié: (2020)

Fluid mechanics and fluid machines : basic concepts and principles (SI units)
par: KUMAR, Shiv
Publié: (2019)

Fluid mechanics & fluid machines basic concepts & principles (SI Units)
par: KUMAR, Shiv
Publié: (2019)

Fluid mechanics, fluid machines and hydraulics : with 500 solved problems
par: GUPTA, V.P
Publié: (1999)

Political Decline and Varieties of Intellectual Reaction in Post-Aristotelian Philosophy
par: Alumona, Victor Sunday
Publié: (2014)