The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines
DOI: 10.1109/IAS.2003.1257783
Bewaard in:
| Hoofdauteurs: | Ojo, O, Osaloni, F., Zhiqiao, Wu, Omoigui, Michael |
|---|---|
| Formaat: | Tijdschrift |
| Taal: | Engels |
| Gepubliceerd in: |
IEEE
2020
|
| Onderwerpen: | |
| Online toegang: | https://ir.oauife.edu.ng/handle/123456789/5081 |
| Tags: |
Voeg label toe
Geen labels, Wees de eerste die dit record labelt!
|
Gelijkaardige items
A control strategy for optimum efficiency operation of high performance interior permanent magnet motor drives
door: Ojo, O., et al.
Gepubliceerd in: (2020)
door: Ojo, O., et al.
Gepubliceerd in: (2020)
Man Minus Machines Equals a Labourer
door: Adekoya, Lawson Olabosipo
Gepubliceerd in: (2018)
door: Adekoya, Lawson Olabosipo
Gepubliceerd in: (2018)
Is There a Limit to Nanoscale Mechanical Machining
door: Oluwajobi, A.O., et al.
Gepubliceerd in: (2020)
door: Oluwajobi, A.O., et al.
Gepubliceerd in: (2020)
report of a magnetic survey of South Africa
door: Beattie, J.C
Gepubliceerd in: (2014)
door: Beattie, J.C
Gepubliceerd in: (2014)
Continuous quantum phase transitions in the one-dimensional spin-1/2 axial next-nearest-neighbour Ising model in two orthogonal magnetic ¯elds
door: ADEGOKE, KUNLE, et al.
Gepubliceerd in: (2020)
door: ADEGOKE, KUNLE, et al.
Gepubliceerd in: (2020)
Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
door: Ojo, Olorunfemi, et al.
Gepubliceerd in: (2023)
door: Ojo, Olorunfemi, et al.
Gepubliceerd in: (2023)
Modeling Socioeconomic Factors Affecting Age at Marriage among females in Kogi State, Nigeria
door: Adarabioyo, M. I., et al.
Gepubliceerd in: (2014)
door: Adarabioyo, M. I., et al.
Gepubliceerd in: (2014)
Energy Flux and Animal Products
door: Emmanuel, B. S.
Gepubliceerd in: (2013)
door: Emmanuel, B. S.
Gepubliceerd in: (2013)
Geophysical investigation of remotely sensed suspected fault Zones around iwaraja-ijebu ijesa area of osun state, nigeria.
door: OKUNUBI, OLAJIDE MICHAEL
Gepubliceerd in: (2023)
door: OKUNUBI, OLAJIDE MICHAEL
Gepubliceerd in: (2023)
Modeling and Implementing Record Linkage in Health Information Systems
door: Philip, Achimugu, et al.
Gepubliceerd in: (2020)
door: Philip, Achimugu, et al.
Gepubliceerd in: (2020)
Some Illusions of Urban/Industrial Paradigm of Development
door: Ighalo, J. I.
Gepubliceerd in: (2013)
door: Ighalo, J. I.
Gepubliceerd in: (2013)
Interiors
door: CAMPBELL, Nina
Gepubliceerd in: (2013)
door: CAMPBELL, Nina
Gepubliceerd in: (2013)
Statistical Analysis of Some Socioeconomic Factors Affecting Age at Marriage among Males in Kogi State, Nigeria
door: Awe, Olushina O., et al.
Gepubliceerd in: (2014)
door: Awe, Olushina O., et al.
Gepubliceerd in: (2014)
Design of an on-line Library Cataloguing System.
door: Faleye, Emmanuel Omoniyi
Gepubliceerd in: (2023)
door: Faleye, Emmanuel Omoniyi
Gepubliceerd in: (2023)
Socio-economic Linkages of the Ife-Ijesa Frontier Population in Southwestern Nigeria
door: Aloba, Oluwole
Gepubliceerd in: (2014)
door: Aloba, Oluwole
Gepubliceerd in: (2014)
Agronomy of permanent crops
door: Department of Crop Croduction and Protection
Gepubliceerd in: (2024)
door: Department of Crop Croduction and Protection
Gepubliceerd in: (2024)
ZERO-TILLAGE AND INTERCROPPING ON A TROPICAL ALFISOL: EFFECTS ON SOIL PHYSICAL PROPERTIES
door: AJAYI, A. S., et al.
Gepubliceerd in: (2020)
door: AJAYI, A. S., et al.
Gepubliceerd in: (2020)
Root growth and nutrient flux of cowpea under field conditions
door: ADEPETU, J. A.
Gepubliceerd in: (2020)
door: ADEPETU, J. A.
Gepubliceerd in: (2020)
Studies on the Natural Antifungal compounds from Yam tubers (Dioscorea Alata. L.)
door: Aderiye, Babatunde Idowu
Gepubliceerd in: (2023)
door: Aderiye, Babatunde Idowu
Gepubliceerd in: (2023)
Broadband Solar Irradiance and Photometric Illuminance at the Tropical Station in Ileife Nigeria
door: Okogbue, Emmanuel Chilekwu
Gepubliceerd in: (2015)
door: Okogbue, Emmanuel Chilekwu
Gepubliceerd in: (2015)
Design of An on-line Library Cataloguing System.
door: Faleye, Emmanuel Omoniyi
Gepubliceerd in: (2023)
door: Faleye, Emmanuel Omoniyi
Gepubliceerd in: (2023)
A PRELIMINARY SURVEY OF THE FERTILITY STATUS OF SOILS IN ONDO STATE UNDER TRADITIONAL CULTIVATION
door: ADEPETU, J. A., et al.
Gepubliceerd in: (2020)
door: ADEPETU, J. A., et al.
Gepubliceerd in: (2020)
Animal flux and animal products
door: Sonaiya, Emmanuel Babafunso
Gepubliceerd in: (2019)
door: Sonaiya, Emmanuel Babafunso
Gepubliceerd in: (2019)
Some illusions of urban/industrial paradigm of development
door: Ighalo, J.I.
Gepubliceerd in: (2019)
door: Ighalo, J.I.
Gepubliceerd in: (2019)
SOLUTIONS for interior design
Gepubliceerd in: (2009)
Gepubliceerd in: (2009)
Machining processes and machines : fundamentals, analysis, and calculations
door: HUDA, Zainul
Gepubliceerd in: (2021)
door: HUDA, Zainul
Gepubliceerd in: (2021)
Studies on the Natural Antifungal Compounds from Yam tubers (Dioscorea Alata. L.).
door: Aderiye, Babatunde Idowu
Gepubliceerd in: (2014)
door: Aderiye, Babatunde Idowu
Gepubliceerd in: (2014)
Sustainable design for interior environments
door: WINCHIP, Susan M.
Gepubliceerd in: (2007)
door: WINCHIP, Susan M.
Gepubliceerd in: (2007)
Post-infectional Production of Phytoalexin in White Yam (Discorea Rotundata Linn.) Innoculated with Botryodiplodia Theobromae Pat
door: Fagbohun, Dayo Emman
Gepubliceerd in: (2014)
door: Fagbohun, Dayo Emman
Gepubliceerd in: (2014)
“From science to technology & innovation management"
door: Ilori, M.O
Gepubliceerd in: (2019)
door: Ilori, M.O
Gepubliceerd in: (2019)
Development of Secured Appliance Automation System for Homes Industries
door: Olukunle, Julius
Gepubliceerd in: (2023)
door: Olukunle, Julius
Gepubliceerd in: (2023)
Modern machining process
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Machining and CNC technology
door: FITZPATRICK, Michael Smith, Keith
Gepubliceerd in: (2019)
door: FITZPATRICK, Michael Smith, Keith
Gepubliceerd in: (2019)
A Thermal Explosion Theory for Parallel Reactions.
door: Okoya, Samuel Segun
Gepubliceerd in: (2014)
door: Okoya, Samuel Segun
Gepubliceerd in: (2014)
Laboratory manual of fluid mechanics and machines
door: GUPTA, V.P. Chandra, J. Gupta, K.S
Gepubliceerd in: (1990)
door: GUPTA, V.P. Chandra, J. Gupta, K.S
Gepubliceerd in: (1990)
Dynamic and steady-state operation of a five phase induction machine with an open stator phase
door: Karugaba, Sosthenes, et al.
Gepubliceerd in: (2020)
door: Karugaba, Sosthenes, et al.
Gepubliceerd in: (2020)
Fluid mechanics and fluid machines : basic concepts and principles (SI units)
door: KUMAR, Shiv
Gepubliceerd in: (2019)
door: KUMAR, Shiv
Gepubliceerd in: (2019)
Fluid mechanics & fluid machines basic concepts & principles (SI Units)
door: KUMAR, Shiv
Gepubliceerd in: (2019)
door: KUMAR, Shiv
Gepubliceerd in: (2019)
Fluid mechanics, fluid machines and hydraulics : with 500 solved problems
door: GUPTA, V.P
Gepubliceerd in: (1999)
door: GUPTA, V.P
Gepubliceerd in: (1999)
Political Decline and Varieties of Intellectual Reaction in Post-Aristotelian Philosophy
door: Alumona, Victor Sunday
Gepubliceerd in: (2014)
door: Alumona, Victor Sunday
Gepubliceerd in: (2014)
Gelijkaardige items
-
A control strategy for optimum efficiency operation of high performance interior permanent magnet motor drives
door: Ojo, O., et al.
Gepubliceerd in: (2020) -
Man Minus Machines Equals a Labourer
door: Adekoya, Lawson Olabosipo
Gepubliceerd in: (2018) -
Is There a Limit to Nanoscale Mechanical Machining
door: Oluwajobi, A.O., et al.
Gepubliceerd in: (2020) -
report of a magnetic survey of South Africa
door: Beattie, J.C
Gepubliceerd in: (2014) -
Continuous quantum phase transitions in the one-dimensional spin-1/2 axial next-nearest-neighbour Ising model in two orthogonal magnetic ¯elds
door: ADEGOKE, KUNLE, et al.
Gepubliceerd in: (2020)