The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines

The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines

DOI: 10.1109/IAS.2003.1257783

Na minha lista:

Detalhes bibliográficos
Main Authors:	Ojo, O, Osaloni, F., Zhiqiao, Wu, Omoigui, Michael
Formato:	Periódico
Idioma:	inglês
Publicado em:	IEEE 2020
Assuntos:	flux linkage and magnetic saturation The steady-state modeling and analysis of the machine
Acesso em linha:	https://ir.oauife.edu.ng/handle/123456789/5081
Tags:	Adicionar Tag Sem tags, seja o primeiro a adicionar uma tag!

Registos relacionados

A control strategy for optimum efficiency operation of high performance interior permanent magnet motor drives
Por: Ojo, O., et al.
Publicado em: (2020)

Man Minus Machines Equals a Labourer
Por: Adekoya, Lawson Olabosipo
Publicado em: (2018)

Is There a Limit to Nanoscale Mechanical Machining
Por: Oluwajobi, A.O., et al.
Publicado em: (2020)

report of a magnetic survey of South Africa
Por: Beattie, J.C
Publicado em: (2014)

Continuous quantum phase transitions in the one-dimensional spin-1/2 axial next-nearest-neighbour Ising model in two orthogonal magnetic ¯elds
Por: ADEGOKE, KUNLE, et al.
Publicado em: (2020)

Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
Por: Ojo, Olorunfemi, et al.
Publicado em: (2023)

Modeling Socioeconomic Factors Affecting Age at Marriage among females in Kogi State, Nigeria
Por: Adarabioyo, M. I., et al.
Publicado em: (2014)

Energy Flux and Animal Products
Por: Emmanuel, B. S.
Publicado em: (2013)

Geophysical investigation of remotely sensed suspected fault Zones around iwaraja-ijebu ijesa area of osun state, nigeria.
Por: OKUNUBI, OLAJIDE MICHAEL
Publicado em: (2023)

Modeling and Implementing Record Linkage in Health Information Systems
Por: Philip, Achimugu, et al.
Publicado em: (2020)

Some Illusions of Urban/Industrial Paradigm of Development
Por: Ighalo, J. I.
Publicado em: (2013)

Interiors
Por: CAMPBELL, Nina
Publicado em: (2013)

Statistical Analysis of Some Socioeconomic Factors Affecting Age at Marriage among Males in Kogi State, Nigeria
Por: Awe, Olushina O., et al.
Publicado em: (2014)

Design of an on-line Library Cataloguing System.
Por: Faleye, Emmanuel Omoniyi
Publicado em: (2023)

Socio-economic Linkages of the Ife-Ijesa Frontier Population in Southwestern Nigeria
Por: Aloba, Oluwole
Publicado em: (2014)

Agronomy of permanent crops
Por: Department of Crop Croduction and Protection
Publicado em: (2024)

ZERO-TILLAGE AND INTERCROPPING ON A TROPICAL ALFISOL: EFFECTS ON SOIL PHYSICAL PROPERTIES
Por: AJAYI, A. S., et al.
Publicado em: (2020)

Root growth and nutrient flux of cowpea under field conditions
Por: ADEPETU, J. A.
Publicado em: (2020)

Studies on the Natural Antifungal compounds from Yam tubers (Dioscorea Alata. L.)
Por: Aderiye, Babatunde Idowu
Publicado em: (2023)

Broadband Solar Irradiance and Photometric Illuminance at the Tropical Station in Ileife Nigeria
Por: Okogbue, Emmanuel Chilekwu
Publicado em: (2015)

Design of An on-line Library Cataloguing System.
Por: Faleye, Emmanuel Omoniyi
Publicado em: (2023)

A PRELIMINARY SURVEY OF THE FERTILITY STATUS OF SOILS IN ONDO STATE UNDER TRADITIONAL CULTIVATION
Por: ADEPETU, J. A., et al.
Publicado em: (2020)

Animal flux and animal products
Por: Sonaiya, Emmanuel Babafunso
Publicado em: (2019)

Some illusions of urban/industrial paradigm of development
Por: Ighalo, J.I.
Publicado em: (2019)

SOLUTIONS for interior design
Publicado em: (2009)

Machining processes and machines : fundamentals, analysis, and calculations
Por: HUDA, Zainul
Publicado em: (2021)

Studies on the Natural Antifungal Compounds from Yam tubers (Dioscorea Alata. L.).
Por: Aderiye, Babatunde Idowu
Publicado em: (2014)

Sustainable design for interior environments
Por: WINCHIP, Susan M.
Publicado em: (2007)

Post-infectional Production of Phytoalexin in White Yam (Discorea Rotundata Linn.) Innoculated with Botryodiplodia Theobromae Pat
Por: Fagbohun, Dayo Emman
Publicado em: (2014)

“From science to technology & innovation management"
Por: Ilori, M.O
Publicado em: (2019)

Development of Secured Appliance Automation System for Homes Industries
Por: Olukunle, Julius
Publicado em: (2023)

Modern machining process
Publicado em: (2020)

Machining and CNC technology
Por: FITZPATRICK, Michael Smith, Keith
Publicado em: (2019)

A Thermal Explosion Theory for Parallel Reactions.
Por: Okoya, Samuel Segun
Publicado em: (2014)

Laboratory manual of fluid mechanics and machines
Por: GUPTA, V.P. Chandra, J. Gupta, K.S
Publicado em: (1990)

Dynamic and steady-state operation of a five phase induction machine with an open stator phase
Por: Karugaba, Sosthenes, et al.
Publicado em: (2020)

Fluid mechanics and fluid machines : basic concepts and principles (SI units)
Por: KUMAR, Shiv
Publicado em: (2019)

Fluid mechanics & fluid machines basic concepts & principles (SI Units)
Por: KUMAR, Shiv
Publicado em: (2019)

Fluid mechanics, fluid machines and hydraulics : with 500 solved problems
Por: GUPTA, V.P
Publicado em: (1999)

Political Decline and Varieties of Intellectual Reaction in Post-Aristotelian Philosophy
Por: Alumona, Victor Sunday
Publicado em: (2014)