THE MAN-CROPS-MACHINE NEXUS: MEMOIR OF A POSTHARVEST ENGINEER
69p.
Guardat en:
| Autor principal: | OGUNSINA, Babatunde Sunday |
|---|---|
| Format: | Lecture |
| Idioma: | en_US |
| Publicat: |
Obafemi Awolowo University Press.
2024
|
| Accés en línia: | https://ir.oauife.edu.ng/handle/123456789/6473 |
| Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
Ítems similars
Man Minus Machines Equals a Labourer
per: Adekoya, Lawson Olabosipo
Publicat: (2018)
per: Adekoya, Lawson Olabosipo
Publicat: (2018)
Machining processes and machines : fundamentals, analysis, and calculations
per: HUDA, Zainul
Publicat: (2021)
per: HUDA, Zainul
Publicat: (2021)
Modern machining process
Publicat: (2020)
Publicat: (2020)
Machining and CNC technology
per: FITZPATRICK, Michael Smith, Keith
Publicat: (2019)
per: FITZPATRICK, Michael Smith, Keith
Publicat: (2019)
Is There a Limit to Nanoscale Mechanical Machining
per: Oluwajobi, A.O., et al.
Publicat: (2020)
per: Oluwajobi, A.O., et al.
Publicat: (2020)
Nexus between Technology Management and Rejuvenation of the Nigerian Economy
per: Oyebisi, Timothy Oyedepo
Publicat: (2018)
per: Oyebisi, Timothy Oyedepo
Publicat: (2018)
A man of the people
per: ACHEBE, Chinua
Publicat: (1966)
per: ACHEBE, Chinua
Publicat: (1966)
Laboratory manual of fluid mechanics and machines
per: GUPTA, V.P. Chandra, J. Gupta, K.S
Publicat: (1990)
per: GUPTA, V.P. Chandra, J. Gupta, K.S
Publicat: (1990)
Fluid mechanics and fluid machines : basic concepts and principles (SI units)
per: KUMAR, Shiv
Publicat: (2019)
per: KUMAR, Shiv
Publicat: (2019)
Fluid mechanics & fluid machines basic concepts & principles (SI Units)
per: KUMAR, Shiv
Publicat: (2019)
per: KUMAR, Shiv
Publicat: (2019)
Fluid mechanics, fluid machines and hydraulics : with 500 solved problems
per: GUPTA, V.P
Publicat: (1999)
per: GUPTA, V.P
Publicat: (1999)
Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
per: Ojo, Olorunfemi, et al.
Publicat: (2023)
per: Ojo, Olorunfemi, et al.
Publicat: (2023)
Biochemistry for the health of man
per: Fakunle, J.B.
Publicat: (2019)
per: Fakunle, J.B.
Publicat: (2019)
Metals in the Service of Man
per: Ojo, Funso .J.
Publicat: (2019)
per: Ojo, Funso .J.
Publicat: (2019)
The surgeon, the knife and the man
per: Adesunkanmi, Abdul Rashid Kayode
Publicat: (2018)
per: Adesunkanmi, Abdul Rashid Kayode
Publicat: (2018)
Empirical Analysis of the Nexus between Saving and Economic Growth in Selected African Countries (1981–2014)
per: Bolarinwa, Segun Thompson, et al.
Publicat: (2023)
per: Bolarinwa, Segun Thompson, et al.
Publicat: (2023)
Empirical Analysis of the Nexus between Saving and Economic Growth in Selected African Countries (1981–2014)
per: Bolarinwa, Segun Thompson, et al.
Publicat: (2023)
per: Bolarinwa, Segun Thompson, et al.
Publicat: (2023)
Philosophy, the World and Man: A Global Conception
per: Chatalian, G.
Publicat: (2013)
per: Chatalian, G.
Publicat: (2013)
Philosophy, the world and man: a global conception
per: Chatalian, G.
Publicat: (2019)
per: Chatalian, G.
Publicat: (2019)
Man and environment, the Nigerian situation
per: Imevbore, A. M. A.
Publicat: (2018)
per: Imevbore, A. M. A.
Publicat: (2018)
The underrated friendly hazards of man
per: Fawole, J . O
Publicat: (2019)
per: Fawole, J . O
Publicat: (2019)
Man physical of Environment Solution
per: Department of Geography
Publicat: (2019)
per: Department of Geography
Publicat: (2019)
Electronic devices in the service of man
per: Osasona, Oladipo
Publicat: (2019)
per: Osasona, Oladipo
Publicat: (2019)
Electronic Devices in the Service of Man
per: Osasona, Oladipo
Publicat: (2019)
per: Osasona, Oladipo
Publicat: (2019)
Man and Environment - the Nigerian Situation
per: Imevbore, A.M.A
Publicat: (2013)
per: Imevbore, A.M.A
Publicat: (2013)
The man, the myth, the mould and the microbe
per: Oyelami, Oyeku A.
Publicat: (2019)
per: Oyelami, Oyeku A.
Publicat: (2019)
NEXUS BETWEEN INTERNAL VALUE CHAIN FINANCE AND COCOA PRODUCTION IN SOUTHWESTERN NIGERIA: IMPETUS TO AGRICULTURAL PRODUCTIVITY AND SUSTAINABILITY
per: I, Ogunjimi S, et al.
Publicat: (2017)
per: I, Ogunjimi S, et al.
Publicat: (2017)
Dynamic and steady-state operation of a five phase induction machine with an open stator phase
per: Karugaba, Sosthenes, et al.
Publicat: (2020)
per: Karugaba, Sosthenes, et al.
Publicat: (2020)
Man against Microbes: No Victor, No Vanquished
per: Deboye, Kolawole
Publicat: (2013)
per: Deboye, Kolawole
Publicat: (2013)
Man against microbes:No victor no vanquished
per: Kolawole, Deboye
Publicat: (2019)
per: Kolawole, Deboye
Publicat: (2019)
The Endless Struggle of Man with Plant Viruses
per: Ladipo, J. L.
Publicat: (2013)
per: Ladipo, J. L.
Publicat: (2013)
The Endless Struggle of Man with Plant Viruses
per: Ladipo, J.L.
Publicat: (2019)
per: Ladipo, J.L.
Publicat: (2019)
Assessment of surface water quality of inland valleys for cropping in SW Nigeria
per: Aboyeji, Olatunji Sunday, et al.
Publicat: (2023)
per: Aboyeji, Olatunji Sunday, et al.
Publicat: (2023)
Crop Physiology
per: Department of Crop Croduction and Protection
Publicat: (2024)
per: Department of Crop Croduction and Protection
Publicat: (2024)
Literature and the art of shaving a man's head in his absence
per: Adeoti, Gbemisola
Publicat: (2019)
per: Adeoti, Gbemisola
Publicat: (2019)
A textbook of engineering chemistry
per: DARA, S.S
Publicat: (2010)
per: DARA, S.S
Publicat: (2010)
A dictionary of chemical engineering
per: SCHASCHKE, Carl
Publicat: (2014)
per: SCHASCHKE, Carl
Publicat: (2014)
A textbook of engineering chemistry
per: RATTAN, Sunita
Publicat: (2012)
per: RATTAN, Sunita
Publicat: (2012)
A textbook of engineering physics
per: AVADHANULU,M.N
Publicat: (2013)
per: AVADHANULU,M.N
Publicat: (2013)
The influence of magnetic saturation and armature reaction on the performance of interior permanent magnet machines
per: Ojo, O, et al.
Publicat: (2020)
per: Ojo, O, et al.
Publicat: (2020)
Ítems similars
-
Man Minus Machines Equals a Labourer
per: Adekoya, Lawson Olabosipo
Publicat: (2018) -
Machining processes and machines : fundamentals, analysis, and calculations
per: HUDA, Zainul
Publicat: (2021) -
Modern machining process
Publicat: (2020) -
Machining and CNC technology
per: FITZPATRICK, Michael Smith, Keith
Publicat: (2019) -
Is There a Limit to Nanoscale Mechanical Machining
per: Oluwajobi, A.O., et al.
Publicat: (2020)